View source for Getting Started with your Neo FreeRunner
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to Getting Started with your Neo FreeRunner.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to Getting Started with your Neo FreeRunner.
Languages: |
English • العربية • Български • Česky • Dansk • Deutsch • Esperanto • Eesti • Español • فارسی • Suomi • Français • עברית • Magyar • Italiano • 한국어 • Nederlands • Norsk (bokmål) • Polski • Português • Română • Русский • Svenska • Slovenčina • Українська • 中文(中国大陆) • 中文(台灣) • Euskara • Català |
Thank you for purchasing this Developer release of Neo FreeRunner. The Neo FreeRunner phone is the second hardware platform to take advantage of Openmoko. This guide will help you get to know your Neo FreeRunner and how to start using your Neo FreeRunner. |
---|
You can boot your Neo FreeRunner in following ways:
These ways allows you to update the kernel and root filesystem.
Press and hold Power button (about 8 seconds) until Openmoko splash screen turns up. You may now release the Power button, and Neo FreeRunner will continue to boot into the Openmoko Image. |
Press and hold Power button, then press and hold AUX button (about 5~8 seconds ). You can see BOOT MENU for NAND Flash. Press AUX to select the options, Power to execute. |
Press and hold AUX button, then press and hold Power button. Release AUX button. You can see BOOT MENU for NOR Flash. (This option is usually used by developers or when flashing the FreeRunner. Also, if you can't log into U-Boot in NAND, then you can log into U-Boot in NOR Flash.) |
NOTE: There are six options you can choose when you log into NOR Flash.
1. Boot 3. Set console to USB 4. Set console to Serial 5. Reset 6. Power off
|
As Openmoko development continues, Openmoko regularly releases updated versions of the Openmoko root filesystem, the kernel, and the U-Boot. These may be programmed into the Flash memory of Neo FreeRunner. You can use the USB cable and Openmoko provided tool to flash Neo FreeRunner.
NOTE: The Openmoko software team builds images daily. If you want to use the latest images, you can download the image from the daily build, but we recommend you download the most stable image from http://downloads.openmoko.org/releases/Freerunner/. Images here have been tested by the test team. |
You can download the flashing tool from: http://downloads.openmoko.org/releases/Freerunner/dfu-util
On the GNU/Linux host, you you can use following command to download dfu-util:
wget http://downloads.openmoko.org/releases/Freerunner/dfu-util
Afterwards you have to change the rights:
chmod a+x dfu-util
You can download the kernel from http://downloads.openmoko.org/releases/Freerunner/
Type in the following command in the terminal of a GNU/Linux host. On some systems you need to be root.
./dfu-util -a (partion name) -R -D (download image file name)
ex:
./dfu-util -a kernel -R -D uImage-2.6.24+svnr4082-r4055-r3-neo1973.bin
NOTE: The meaning of parameter you spcified:
-a --alt alt Specify the altsetting of the DFU interface by name or by number |
You can download the root filesystem from : http://downloads.openmoko.org/releases/Freerunner/
Type in the following command in the terminal of a GNU/Linux host.
./dfu-util -a rootfs -R -D openmoko-devel-image-fic-gta02.jffs2
When flashing succeeds
status(0) = No error condition is present
Done!
Connect Neo FreeRunner to Linux host with USB cable. For OS X please refer to MacOS_X. After booting into Openmoko image, there will be a new interface, usb0, in your Linux host.
Type in the following command in the terminal of a GNU/Linux host.
ifconfig usb0 192.168.0.200 netmask 255.255.255.0 ssh root@192.168.0.202
Press Enter to pass the password.
Edit /etc/network/interfaces
auto usb0 iface usb0 inet static address 192.168.0.200 netmask 255.255.255.0
Edit /etc/conf.d/net
config_usb0="192.168.0.200/24"
Restart the networking service and type in the following command in the terminal of GNU/Linux host.
ssh root@192.168.0.202
Press Enter to pass the password.
If you don't want to remember the IP number of your phone you can create an alias by adding the following line to your /etc/hosts:
192.168.0.202 openmoko
Now it should immediately be possible to connect your phone using the following command line:
ssh root@openmoko
If you want to know more about FreeRunner, you can get more information in following topics: