View source for Prototypes
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to Prototypes.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Return to Prototypes.
Prototypes are pieces of hardware such as boards, fully assembled devices, batteries, accessories that OpenMoko uses during the development of new hardware.
This page tracks such prototypes, in which condition their life started, and what happened to them during their lifetime.
Prototypes cannot be purchased. They will be loaned out on a case by case basis, and collected back for post mortem analysis.
If you believe you need a prototype of some upcoming hardware, please mailto:openmoko-kernel@lists.openmoko.org.
18 Jan 2008 Arrived from Suzhou (batch of 3) as PCBA without modules
18 Jan 2008 Arrived from Suzhou (batch of 3) as PCBA without modules
21 Jan 2008 Reworked for power measurements 18 Jan 2008 Arrived from Suzhou (batch of 3) as PCBA without modules
29 Jan 2008 Miles: receiver test failed (receiver broken) 29 Jan 2008 Same as #1
29 Jan 2008 verified by Willie
29 Jan 2008 sent to Andy
29 Jan 2008 verified by Willie
29 Jan 2008 sent to Werner
29 Jan 2008 verified by Willie
29 Jan 2008 sent to Andy
29 Jan 2008 Same as #1
29 Jan 2008 sent to Harald
29 Jan 2008 Same as #1
29 Jan 2008 sent to Werner
29 Jan 2008 hardware verified by Miles, except for
28 Jan 2008 Put inside GTA01 case, speaker, antennas
28 Jan 2008 Rework wifi FW to 2.0.0.40
28 Jan 2008 Arrived from Suzhou (batch of 10) as PCBA with all modules (wifi FW 1.3), full DM1 (v009) and DM2 (v012)