View source for Neo 1973 and Windows
From Openmoko
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Template used on this page:
Return to Neo 1973 and Windows.
You do not have permission to edit this page, for the following reasons:
You can view and copy the source of this page:
Template used on this page:
Return to Neo 1973 and Windows.
This page tries to collect some information on how to use your Neo1973 together with a computer running a Microsoft(R) Windows(TM) series operating system.
Please note that this is not really supported, and that the OpenMoko developers themselves only use Linux for testing.
How to connect to Windows XP via Bluetooth is described here: Manually_using_Bluetooth#Bluetooth_networking_with_a_Windows_XP_system
NOTE: this has not been tried/verified yet, but is rather only a theoretical description. Please feel free to correct/extend |
NOTE: it doesn't work for two reasons: phase0 devices have USB Vendor ID and Product ID matching Maemo settings linked below and Windows XP Pro doesn't do communication but ends with "code 10" error after NDIS driver is selected |
NOTE: It should be stated, though, that installing this driver will allow the Neo to be charged via a Windows system. There is enough communication between Windows USB and the Neo for it to start charging with 500mA. Together with Bluetooth connectivity that might just be good enough for some of us. |
You should now be able to connect to your Neo1973 on 192.168.0.202.
Further references: